Picking from a wall of shingle roof colors feels like a style choice, and partly it is. Under the Florida sun it is also a heat choice. A dark roof soaks up more sunlight than a light one, and some of that heat reaches the attic and the rooms below. Your HOA may also have a say before you choose anything.
This guide draws on research from the Florida Solar Energy Center, the U.S. Department of Energy, the EPA, the Cool Roof Rating Council and shingle makers. Each section links the source it relies on. For the wider choice between shingle, metal, tile and flat roofs, see our guide to roofing materials for Lakeland homes.
Shingle Color Changes How Hot a Roof Gets
Dark shingles absorb more sunlight and run hotter than light ones. Florida Solar Energy Center testing found black asphalt shingles reflect about 5 percent of sunlight and gray about 22 percent. Even nominally white shingles reflected only about 25 percent, so color helps, but a standard light shingle is still far from a reflective surface.
The Florida Solar Energy Center (FSEC) measured reflective roofs on homes in Florida in the early 1990s (FSEC, reflective roofing research). Its lab values for asphalt shingles were:
| Shingle color | Share of sunlight reflected (FSEC lab value) |
|---|---|
| Black | 0.05 (about 5 percent) |
| Gray | 0.22 (about 22 percent) |
| Nominally white | 0.25 (about 25 percent) |
| White elastomeric coating, new | 0.71 |
| White elastomeric coating, after exposure | 0.59 |
On one test home, FSEC recorded shingle surface temperatures of 71 to 77 degrees Celsius (about 160 to 171 degrees Fahrenheit) in full midsummer sun before a white coating was applied, and about 43 degrees Celsius (about 109 degrees Fahrenheit) after. That gap came from a coating, not from a shingle color, but it shows how much sunlight a roof surface can hold.
The EPA says conventional roofing materials “may reach as much as 66°F warmer than the surrounding air” on a warm day, based on a 2023 study it cites (EPA, what are heat islands). FSEC also noted that attic temperatures may reach 55 degrees Celsius (131 degrees Fahrenheit) on summer days.
Cool Roof Shingles Explained
Cool roof shingles are asphalt shingles made with light or specially colored granules that reflect more sunlight than standard shingles of a similar shade. The Department of Energy says white roofs are coolest, but “cool color” products are a popular choice for roofs that neighbors can see, and cool asphalt shingles exist for steep roofs.
The DOE’s Guide to Cool Roofs explains that a roof’s “coolness” comes from two properties, both measured from 0 to 1 (DOE, Guide to Cool Roofs):
- Solar reflectance. The fraction of sunlight the surface reflects.
- Thermal emittance. How well the surface sheds the heat it has absorbed.
Higher values mean a cooler roof. The EPA lists the steep-slope cool options as asphalt shingles with light or cool-colored granules, metal shingles with reflective paint or granules, polymer shingles with cool pigments, and tile with cool glazes or coatings (EPA, using cool roofs). The EPA adds that products with infrared-reflective pigments usually cost more than conventional products.
The DOE guide, published in February 2011, said cool asphalt shingles then sold for up to $0.50 per square foot more than conventional shingles. That is the DOE’s national figure from that year, not a price from this business, and current prices will differ.
Rating Labels to Look For
The Cool Roof Rating Council publishes measured reflectance and emittance for roofing products, including asphalt shingles. It does not recommend brands. Its advice is to ask your contractor which cool products they offer, then look those products up in its Rated Roof Products Directory before you choose a color.
The Council says “A ‘cool’ roof or wall reflects and emits the sun’s heat back to the sky,” and that lighter colors are generally more reflective, but color alone does not decide performance (Cool Roof Rating Council). It also explains the Solar Reflectance Index (SRI), a single number calculated from reflectance and emittance that usually runs from 0 to 100. The Council stresses that SRI is calculated, not measured.
A few points help when reading a product sheet:
- Aged values matter. The DOE guide says many roofs become less reflective over time, so savings should be judged on long-term, aged values (DOE, Guide to Cool Roofs).
- ENERGY STAR no longer labels roofs. The ENERGY STAR page states that its specification for roof products “was sunset on June 1, 2022” (ENERGY STAR, roof products). An older brochure that mentions an ENERGY STAR roof list is out of date.
- Named cool lines exist. CertainTeed describes its Landmark PRO Solaris line as “energy-efficient, impact-resistant cool roof shingles” (CertainTeed, how to choose a roof color). Check the rating directory for the exact color you want, since values vary by color.
Energy Savings and Cost Compared
Cool roofs can cut cooling energy, but the size of the saving varies widely by house. The Cool Roof Rating Council puts average savings at 7 to 15 percent of total cooling costs. FSEC’s Florida field homes, using white coatings rather than shingles, averaged 19 percent air conditioning savings, with a range of 2 to 43 percent.
Here is what each source reports:
| Source | What it measured | Result |
|---|---|---|
| Cool Roof Rating Council | Average cool roof savings | 7 to 15 percent of cooling costs |
| EPA | Peak cooling demand, air-conditioned homes | 11 to 27 percent lower |
| DOE guide | Single-story building in a warm or hot climate | Up to 15 percent less yearly air conditioning energy |
| DOE guide | Cool color roof on a home | Up to $0.05 per square foot per year (2011 figure) |
| FSEC | Florida homes with white roof coatings | 19 percent average, 2 to 43 percent range |
The dollar figure is a national estimate from the DOE’s 2011 guide, not this business’s pricing. The DOE also says it is “rarely economical” to replace a sound roof only to make it more reflective. In other words, color is worth weighing when the roof is due anyway, not as a reason to tear off a good one.
The house itself shapes the result. FSEC’s smallest saving, 2 percent, came from a home where appliance use rose after the coating, and its largest came from an uninsulated flat roof. Attic insulation and airflow matter as much as color, which our post on attic ventilation for Lakeland roofs covers in more detail.
Algae Streaks Show More on Light Shingles
Black or brown streaks on a roof are usually algae, not dirt. The Asphalt Roofing Manufacturers Association says the streaks show most clearly on light and white roofs and are much harder to see on darker shingles. In a warm, humid climate, that trade-off belongs in the color decision.
ARMA names the usual cause as airborne algae, most often *Gloeocapsa magma*, whose natural pigments darken the roof over time (ARMA, algae discoloration of roofs). It says “white or light-colored roofs” may “gradually turn dark brown or black.” Algae also cut reflectance: FSEC traced most of the 17 percent drop in its white coating’s reflectance to blue-green algae and, to a lesser degree, dirt (FSEC).
Two points follow for a light roof:
- Algae-resistant shingles. ARMA says these are an option when reroofing a roof prone to algae. CertainTeed’s StreakFighter line carries 25 to 30 year coverage against algae streaks (CertainTeed).
- Cleaning is a job for a professional. ARMA warns against power washers, brushes and scrubbing, which can strip granules, and says a cleaned roof is slippery, so professional help is recommended. Do not go on the roof yourself.
HOA Rules to Check Before You Pick a Color
If your home is in a homeowners association, read its rules before you fall for a color. Many associations keep architectural rules and an approval process for exterior changes, and a roof is one of the most visible changes there is. Ask for written approval of the exact product and color first.
Your association’s declaration, architectural guidelines and any approved color list are the documents that decide this. A practical order:
- Get the documents. Ask the association or its management company for the current architectural guidelines and any roof color list.
- Check the approval process. Note what the application needs, such as a product name, color name, sample or photo, and how long a decision takes.
- Bring the product details. Give the exact shingle line and color, not just “gray,” and the rating directory entry if you are asking for a cool color.
- Get it in writing. Keep the written approval with your roofing contract and permit papers.
- Confirm before work starts. A roof installed in an unapproved color may be costly to change.
These rules come from your own association’s documents, so they differ from one neighborhood to the next. If a rule is unclear or you think it is being applied unfairly, ask the association to explain it in writing and talk to an attorney who handles HOA matters.
Matching Shingle Roof Colors to the House
There is no fixed rule for which roof color suits which house color. The sources here deal with heat, not looks. A useful approach is to narrow the choice by heat and HOA rules first, then judge the remaining colors against your walls, trim and brick using full-size samples and a color preview tool.
CertainTeed points owners to its ColorView visualizer to see roofing, siding and trim together before buying (CertainTeed, how to choose a roof color). Other makers offer similar tools. Some practical steps:
- See it outside. Ask for a full shingle or sample board and look at it against the house in morning and afternoon light. Small chips on a screen rarely look the same on a roof.
- Look at real roofs. Ask the contractor for addresses where the color is already installed, so you can see it from the street.
- Check the rated value for each color. Reflectance varies by color within one shingle line, so compare the rating directory entries for each shade you like.
- Think about streaks. As ARMA notes, light colors show algae more, so pair a light color with algae resistance.
Shingle style also changes how a color reads. Layered architectural shingles show shadow lines that flat 3-tab shingles do not; our post on architectural shingles vs 3-tab shingles explains the difference.
A Color Checklist for a Lakeland Roof Replacement
The color decision usually comes during a roof replacement, when every option is open at once. Settling heat, ratings, algae and HOA approval in the right order keeps it simple. Start with what the association allows, then weigh heat and rated values, then choose the look you like from what remains.
A short checklist for your quote:
- HOA approval. Confirm the color and product are approved in writing, if your home is in an association.
- Rated reflectance. Ask for the Cool Roof Rating Council directory entry for the exact color.
- Aged values. Compare aged, not just new, reflectance and emittance.
- Algae resistance. Ask whether the shingle carries algae-resistance coverage, especially for a light color.
- Attic airflow and insulation. Ask whether the attic is vented and insulated well, since color alone does not fix a hot attic.
- Written warranty. Ask for the written warranty for the exact shingle and color.
When you are ready to talk through colors and products for your own home, the Roof Repair Lakeland FL page on roof replacement in Lakeland explains what a replacement involves.
Frequently Asked Questions
How to decide on roof shingle color?
Start with your HOA’s approved list, if you have one, then compare heat. FSEC found black shingles reflect about 5 percent of sunlight and gray about 22 percent (FSEC). Check each color in the Cool Roof Rating Council directory (CRRC), then judge full-size samples against your house in daylight.
Should your roof be lighter or darker than your house?
No source used here sets a rule for looks. For heat, lighter is better: the DOE says dark roofing absorbs sunlight and raises air conditioning needs, while white and cool color roofs stay cooler (DOE, Guide to Cool Roofs). ARMA notes light roofs show algae streaks more (ARMA).
What is the best color shingle for a tan house?
No source here names a best color for any house color. Choose from colors your HOA allows, compare their rated reflectance in the Cool Roof Rating Council directory (CRRC), and preview them with a maker’s tool such as CertainTeed’s ColorView (CertainTeed) before seeing full samples outside.
What roof shingles to stay away from?
Be cautious with any shingle you cannot look up. The Cool Roof Rating Council suggests checking a product in its directory before choosing (CRRC), and ARMA suggests algae-resistant shingles where algae is a problem (ARMA). Ask for the exact product line and its written warranty.





