Commercial TPO Roofing in Lakeland, FL
If you’ve collected TPO quotes for your Lakeland building and they’re all over the map, there’s a reason — and it’s not just margin. Two TPO roofs that look identical can be built to completely different specs, and the spec is what decides whether you get 15 years or 30. Membrane thickness, seam welding, and attachment method matter more than the brand. We install commercial TPO to a spec that fits your building.
Why Lakeland Businesses Choose Us for TPO
National roofing chains service Lakeland from a hub in Tampa — your leak waits in a ticket queue. We’re local, so we respond fast. And we quote TPO to a real spec instead of a vague ‘we install TPO’: the membrane thickness matched to your building, heat-welded seams done correctly, and the attachment method chosen for your structure and wind requirements.
Installed to Spec
Our Services
Commercial TPO Services in Lakeland
TPO Installation
Complete TPO systems installed to spec — the right membrane thickness, quality heat-welded seams, and the correct attachment method for your Lakeland building.
TPO Repair
Fast repair of seam separations, punctures, and flashing failures to keep water off your operation.
TPO Recover & Replacement
Full recover or replacement of a failed TPO roof, phased to keep your business open.
Cool-Roof TPO
TPO’s reflective white surface bounces solar heat away and cuts cooling costs through Lakeland’s long summer.
Roof Coating & Restoration
Extend a sound flat roof at a fraction of replacement. See our roof coating service.
Preventive Maintenance
Scheduled inspections and minor repairs that catch ponding and seam issues before they become failures.
Problems We Solve
Flat commercial roofs fail slowly, then all at once. Ponding water or a lifted seam can sit unnoticed until a heavy Lakeland storm pushes water through it and over your operation. Planned work is a predictable line item you control; an emergency failure is lost business plus damaged inventory.
We plan every TPO project around your operating hours, to a written spec — so the roof gets done without shutting your business down.
Roof Assessment
We assess your roof, deck, and rooftop equipment, and recommend the right TPO thickness and attachment method.
Written Proposal
You get an itemized proposal with the membrane thickness, seam detail, attachment method, and cost spelled out.
Phased Installation
We sequence work by section and dry in daily, welding seams to spec so a surprise storm never reaches your interior.
Final Inspection
We verify seam welds, drainage, and flashing before the job is done.
Service Areas
Commercial TPO roofing in Lakeland and across Polk County — from Winter Haven and Bartow to Plant City — for storefronts, offices, and warehouses.
Roofing Materials
Why Choose Us
TPO is not one product — it’s a system with specs. Thickness, measured in mils, looks the same on a proposal line, but a 60-mil and an 80-mil membrane perform very differently under Central Florida’s UV and foot traffic. Seams are heat-welded — a properly welded seam is stronger than the membrane itself, while a poorly welded one is the first thing to leak. And attachment, mechanically-fastened versus fully-adhered, changes how the roof handles wind uplift. When two Lakeland TPO quotes differ by thousands, it’s usually these specs — we lay them out so you compare real systems.
Get a TPO Roofing Proposal for Your Lakeland Building
Whether you’re comparing confusing quotes, dealing with a leaking flat roof, or planning a replacement, the first step is a clear spec and a predictable plan. Local response, honest specs, and phased work that keeps your business open.
Request a Free Estimate
- Required Fields
Frequently
Asked
Questions
How long will a 60-mil TPO roof last?
A well-installed 60-mil TPO roof commonly lasts somewhere in the range of 15 to 20 years, though Central Florida’s intense heat and UV can push it toward the lower end if seams and installation aren’t first-rate. An 80-mil membrane generally lasts longer. The single biggest variable isn’t the mil rating alone — it’s seam-weld quality and installation.
Can TPO be installed directly on plywood?
Generally, TPO shouldn’t be adhered or fastened directly onto bare plywood without the proper layers between them — a suitable cover board or insulation is typically installed first to provide a stable, code-compliant substrate and protect the membrane. Installing TPO straight onto plywood can lead to premature failure and may not meet code. On a Lakeland commercial roof, we build the correct assembly beneath the membrane.
How much does a TPO roof cost?
Commercial TPO cost is driven by roof size (measured in squares), membrane thickness, attachment method, insulation, the condition of the existing roof, and roof access. Because those vary widely, there’s no flat rate. We provide a written, itemized proposal after assessing your specific Lakeland property.
What are the disadvantages of a TPO roof?
TPO’s main vulnerabilities are seam failure if welds are done poorly and susceptibility to punctures on thinner membranes, along with the ponding-water issues common to any flat roof. Most of these come down to installation quality and spec, not the material itself. Choosing an adequate thickness and a skilled installer addresses the majority of TPO’s downsides.
How long will a TPO roof last in Florida?
Flat single-ply roofs like TPO typically last around 15 to 30 years in Florida, with the range driven by membrane thickness, seam quality, installation, and maintenance. Our heat accelerates seam stress and our storms exploit any weakness, so a maintained, well-installed roof reaches the top of that range while a neglected one fails early.